home *** CD-ROM | disk | FTP | other *** search
/ Cream of the Crop 11 / Cream of the Crop 11-1.iso / lan / 3c589x.zip / 3C589X.EXE / README.TXT < prev    next >
Text File  |  1995-09-20  |  7KB  |  146 lines

  1.  
  2. README.TXT File
  3. 3Com Corporation
  4. 3Com EtherLink III LAN PC Card (3C589 PC Card)
  5.  
  6. Please read this file before installing the 3Com EtherLink III LAN PC Card.
  7. This file contains information that became available after the 3Com 
  8. EtherLink III LAN PC Card User Guide went to the printer.
  9.  
  10. This file is divided into three sections:
  11.      General Information  - Read for all network operating systems
  12.      Novell NetWare Information - Read if you are using Novell NetWare
  13.      Problems and Solutions - Provides solutions to common problems
  14.  
  15.                Important General Information 
  16.                =============================
  17.  
  18. The 3Com 3C589 works with laptops that contain Card Services.  If you are not 
  19. running Card Services on your system, please note that the 3C589 willl work
  20. with laptops that have an Intel PCMCIA (PC Card) controller or compatible. 
  21. If Card Services are not installed, it might not work with other controllers.
  22.  
  23.  
  24. You may override some driver configuration paramters (IRQ, I/O base and
  25. CIS Memory base address).  See the sample NET.CFG or PROTOCOL.INI files
  26. for proper syntax.                                 
  27.  
  28.  
  29.                 Novell NetWare Information
  30.                 ==========================
  31.  
  32. The 3C589 EtherLink III LAN EtherDisk contains a Novell NetWare DOS
  33. ODI Driver (3C589.COM), and a Novell NetWare OS\2 ODI driver (3C589.SYS).
  34. The 3C589.COM DOS ODI driver is Novell certified.  The 3C589.SYS OS/2 ODI 
  35. driver Novell certification is still in progress.
  36.  
  37. If you are using 3Com's automatic installation program, AutoLink, delete 
  38. references to any other network adapter in the AUTOEXEC.BAT file and in the 
  39. NET.CFG file prior to executing AutoLink. You can delete the NET.CFG file, 
  40. and a new one will be copied over. 
  41.  
  42. If you are using NetWare 4.X you may prefer to use Novell's Installation 
  43. Program.  Using the NetWare installer adds windows client support, provides 
  44. NetWare User Tools for printing, and allows you to log in and out using 
  45. Windows.
  46.  
  47.  
  48. Full-Duplex Operation
  49. =====================
  50. The DOS ODI NetWare driver supports full-duplex operation (that is,
  51. sending  and receiving data simultaneously).  WARNING: You MUST be
  52. connected to a switched full-duplex Ethernet hub to use this feature
  53. (this feature disables collision detection).  
  54.  
  55. To enable this feature add the ODI Keyword "FULL DUPLEX" to the 
  56. NET.CFG file.
  57.  
  58.  
  59.  
  60. Updates and corrections to the 3Com EtherLink III LAN PC Card User Guide 
  61.  
  62. Page 4-6 - step #4 Copy the PROTOCOL.INI fragment from the NDIS\DOS 
  63.          subdirectory on the EtherDisk diskette to the \VINES subdirectory.
  64.          Correction: Copy the PROTOCOL.INI fragment from the 
  65.          MSLANMAN.DOS\DRIVERS\ETHERNET\ELPC3 subdirectory. 
  66.  
  67. Page 4-19 - Step #4: Press Return to go back to the NDIS driver screen.
  68.          Correction: Press Return to go back to the Update Driver screen.
  69.  
  70. Page 6-5 - Figure 6-4: Diagnostic screen.
  71.          Correction: The FIFO Built-in Self-test does not exit on the
  72.          Diagnostic screen shown in Figure 6-4.
  73.  
  74. Page 4-3 - Replace the Windows for WorkGroups driver installation 
  75.          instructions in the user guide with instructions in WFW.TXT file.
  76.          The correct instructions can be accessed in two ways:(1) select
  77.          Windows for WorkGroups in the main menu of the EtherDisk diskette,
  78.          or (2)use a text editor to view the WFW.TXT file in the NDIS
  79.          directory.
  80.  
  81.  
  82.  
  83.                      Problems and Solutions
  84.                      ======================
  85.  
  86. Problem:  Installation/Diagnostics does not seem to go past the 
  87.       "Please Wait..."  prompt.
  88. Solution: In order to run the Installation/Diagnostics you must have at least
  89.       480K of conventional memory free.  (You can check how much you have
  90.       using the MEM command at the DOS prompt).  If you have less than
  91.       480K, you can comment out items from the CONFIG.SYS or 
  92.       AUTOEXEC.BAT files to free up memory. Make sure that Card Services 
  93.       remains loaded.  Another option is to reboot, and click on F8 when 
  94.       the "Starting DOS" message is displayed. A prompt appears telling 
  95.       you which items to load, and which items not to load. 
  96.  
  97. Problem:  Installation/Diagnostics program seems to run at very slow pace.
  98. Solution: Make sure to have a memory manager installed.  This will increase
  99.         the performance.
  100.  
  101. Problem:  The system hangs when using the Toshiba 3400 or the Toshiba 1910CS 
  102.       machines, or the card does not function.
  103. Solution: If using Phoenix Card Services, modify the PCM.INI file to exclude 
  104.       memory locations C600 through C7FF. If you are using Phoenix Card 
  105.       Services Release 2.0 v1.0, upgrade to a newer version of Card 
  106.       Services and modify the PCM.INI file.
  107.  
  108. Problem:  The 3C589 PC Card has problems working with Phoenix Card Services
  109.       Release 2.0 v1.0.  For example, you may not be able to assign IRQ 5 
  110.       to the 3C589 PC Card.
  111. Solution: Upgrade to a newer Phoenix Card Services 
  112.       version, or try using the 3C589 PC Card without Card Services.
  113.  
  114. Problem:  When you run installation/diagnostics on the Toshiba 4900 or 
  115.       Cannon Innova Book 150C machines,  "No PC Card detected" message 
  116.       may appear.
  117. Solution: Modify the PCM.INI file to exclude interrupt 0xA.  The correct
  118.       syntax is:
  119.           exclude_irq = 0xA 
  120.       
  121. Problem: When using an Epson ActionNote 700CX in Enabler mode (not using
  122.       Card Services), if the 3C589 PC Card is inserted after the PC is
  123.       booted, you may get "Driver not loaded" or "Interrupt 0".
  124. Solution: Set the "PCMCIA Card Boot" parameter to DISABLE in the BIOS setup.
  125.       See your Epson user guide for information on changing the BIOS setup.
  126.  
  127. Problem: With a TI TravelMate 4000M, and other PCs that use Sound chips,
  128.       it may load the driver correctly but will not attach to the server.
  129. Solution: The TI 4000M's SOUND SYSTEM uses IRQ 5.  Choose another IRQ (for 
  130.       example: 3 or 10) and IO address (example: 300 or 360) and set it in
  131.       the configuration files.  See the sample NET.CFG and PROTOCOL.INI.
  132.  
  133. Problem: The DOS NDIS driver installed on a Digital HiNote Ultra CT475 PC 
  134.       may loose the network connection in a Windows background session.
  135.       When the problem occurs, the error message displayed is "this device
  136.       does not exist in the network! abort, fail?".
  137. Solution: Only use in Windows foreground sessions or in a Windows DOS box.
  138.  
  139. Problem:  "No PC Card detected" message appears when you use the 3C589 PC 
  140.       Card in an IBM 720.
  141. Solution: The 3C589 PC Card is not compatible with the IBM 720 machine.
  142.  
  143.  
  144. (%VER README.TXT v1.1g)
  145.  
  146.